Home › Bulk warm-up

Warm Up 150 Email Accounts: Cost, CSV, Ramp

By BobWorkUpdated 2026-11-1111 min read
Dashboard view for warming up 150 email accounts with CSV import, ramp schedule, domain checks and ready status.

To warm up 150 email accounts in BobWork, a new account created from 10 November 2026 should use Agency at $89/month for up to 300 mailboxes. Skip bulk setup, DNS checks or gradual ramping, and one bad domain can hurt the whole fleet. This guide gives the cost, CSV format, ramp maths and checks before outreach.

At this size, you are not warming one mailbox. You are operating a sending system. The useful questions are practical: what does 150 cost, how do you import them safely, how much warm-up traffic appears, and when is each mailbox ready to send?

If you are still choosing fleet size, compare the neighbouring guides for 100 mailboxes and 200 mailboxes. For the import workflow, keep the CSV bulk upload guide open while you prepare the file.

What does 150 cost?

For new accounts created from 10 November 2026, BobWork pricing is simple: 1–3 mailboxes use Free, 4–10 use Pro, and 11 or more use Agency. At 150 mailboxes, that means Agency.

Agency is $89/month or $890/year. It supports up to 300 mailboxes and includes 100,000 Outbound emails a month if you use the optional campaign sender. You do not need Outbound to run warm-up.

Older accounts keep the plan they signed up on. If an older account is still on the per-mailbox ladder, its cost can differ. Do not use the older ladder to price a new account.

MailboxesCurrent plan for new accounts from 10 Nov 2026Monthly costOlder per-mailbox plan reference
3Free$0$0
10Pro$19varies by old plan
50Agency$89$141/month on the older 3-free ladder
100Agency$89$194/month on the older 3-free ladder
150Agency$89$294/month on the older 3-free ladder
200Agency$89$394/month on the older 3-free ladder
300Agency$89$594/month on the older 3-free ladder

The table separates current pricing from older account pricing because accounts created before 10 November 2026 keep their original plan. New visitors should expect Free, Pro or Agency.

If you only need warm-up, the cost question ends there. If you also send campaigns from warmed mailboxes, Outbound is optional. Agency includes 100,000 Outbound emails a month, then $1 per 1,000 after that.

How do you warm up 150 email accounts?

Use the bulk CSV workflow. In BobWork, go to Add mailbox → Many mailboxes: upload a CSV. You can paste rows or upload a file.

Use these columns:

ColumnRequired?What to put
emailYesFull mailbox address, for example alex@example.com
app_passwordYesApp password or mailbox password, depending on provider
nameYesSender name for the mailbox
imap_hostSometimesRequired for non-preset domains; Gmail, Yahoo and iCloud hosts are filled in

Each row gets the same IMAP and SMTP login test as a single mailbox. Failed rows are listed with the reason. Already-connected rows are skipped, so a re-upload is safe after you fix errors.

With 150 rows, expect some failures. Common causes are wrong passwords, disabled IMAP, missing app passwords and domains using a different mail host. Fix the failed rows and upload again.

For Gmail and Google Workspace, the recommended route is IMAP with an app password. App passwords require 2-Step Verification. Google explains how app passwords work. One-click Google sign-in also exists, but Google caps unverified apps at 100 users, BobWork has not done the CASA audit, and Google shows an unverified-app notice.

For Yahoo and iCloud, use app passwords. For Zoho Mail, use the Zoho Mail API route with a Self Client code, including on Zoho’s free plan, or IMAP on Mail Lite and above. For Lark Mail, use IMAP with a mail-client password.

Amazon SES, SendGrid and Mailgun need two parts: the platform’s SMTP credentials for sending and a receiving inbox over IMAP. That receiving inbox is where warm-up replies and spam placement are checked.

BobWork does not support Outlook or Microsoft 365 yet. Microsoft requires OAuth, so do not put Outlook mailboxes into a 150-row file and expect password IMAP to work.

What is the warm-up ramp?

Each mailbox ramps independently. The engine starts at 3 warm-up emails per day, adds 2 per day, and caps at 30 per day. The cap is editable per mailbox, up to 100, but 30 is the normal ceiling.

Weekends run at 30% volume. Sends are spread from 09:00 to 18:00 in the mailbox’s own time zone. The engine decides every 15 minutes with randomness, and the same pair never writes to each other twice within 3 hours.

At 150 mailboxes, small per-mailbox numbers become large fleet numbers.

DayPer-mailbox target150-mailbox daily totalWhat it means
13/day450/dayFirst login and placement signals
715/day2,250/dayEnough volume to see weak domains
1429/day4,350/dayNear the default cap
15+30/day4,500/dayFull default warm-up pace
Weekend at cap9/day1,350/dayWeekend volume is 30%

Do not read this as a cold email sending plan. Warm-up mail is controlled, plain text and generated by the engine. Real cold email adds risk from targeting, copy, bounces, complaints, unsubscribe handling and reply quality.

For real outreach, keep warm-up running at 10–15/day during campaigns and keep cold outreach around 30–50/day per mailbox. Add mailboxes rather than forcing more volume through one sender.

If you need campaign volume planning, use how many mailboxes you need for cold email. If you are planning the ramp itself, the email warm-up schedule guide gives smaller 14-day and 28-day examples.

Should you use a private pool?

BobWork uses a shared warm-up network by default. Every active mailbox on the service can exchange warm-up emails with every other active mailbox, across accounts. One mailbox is enough to start because it can warm with the shared network.

At 150 mailboxes, consider a private pool. Go to Mailbox pool → Pool mode and switch to Private pool. Then only your own mailboxes write to each other. A private pool needs at least two mailboxes, which is not an issue at this size.

Pool modeBest forTrade-off
Shared networkStarting quickly; mixed providers; one or a few mailboxesYour mailboxes exchange warm-up with other active mailboxes on the service
Private pool50+ owned mailboxes; agency fleets; strict address exposure controlOnly your mailboxes warm each other, so your own fleet diversity matters

The free warm-up pool handles scheduling, reply threads and spam rescue automatically. About 40% of received warm-up mail gets a reply, threads end after 3 messages, and the content is plain office talk with no links or images.

Private does not mean you can ignore diversity. Peers on a different domain or provider are picked twice as often by the engine. If all 150 accounts sit on one domain and one provider, you have less natural variety than a fleet spread across domains.

For a deeper decision, read private warm-up pools vs public networks. The short version: shared is easier; private is often cleaner for large owned fleets.

How should domains be spread?

A 150-mailbox setup should not live on one sending domain. For cold email, a typical spread is 2–5 mailboxes per domain. That keeps one domain from carrying the whole sending load.

At 150 mailboxes, that usually means many domains. The exact number depends on your risk tolerance, sending target and whether the domains are new or already established. New domains should warm for 2–3 weeks before full campaign volume. Existing domains often need at least 7 days.

Every sending domain needs SPF, DKIM and DMARC. BobWork checks SPF, DKIM and DMARC daily via DNS and shows results per domain. The DKIM selector check looks for common selectors including google, zmail, default, selector1, selector2, k1, s1, mail, dkim, lark, feishu and zoho.

Provider rules matter too. Google’s sender guidelines say to keep spam complaints in Postmaster Tools below 0.10%, and avoid ever reaching 0.30% or higher. Yahoo’s sender best practices require SPF and DKIM, DMARC at least p=none and passing, aligned From domains, one-click unsubscribe for bulk, and spam rates under 0.3%. See Google’s email sender guidelines and Yahoo’s sender best practices.

Microsoft also has rules for high-volume senders to Outlook.com and Hotmail. For domains sending over 5,000 emails per day, Microsoft requires SPF pass, DKIM pass, DMARC at least p=none with alignment, and rejects non-compliant mail with 550 5.7.515. See Microsoft’s sender requirements before running high-volume domains.

If DNS is the blocker, start with SPF, DKIM and DMARC for cold email. If the domains are new, use the new domain warm-up guide before attaching campaigns.

How do you read results?

Do not average everything and call the fleet healthy. Averages hide bad mailboxes.

BobWork’s spam rate is the share of a sender’s warm-up mail that receiving mailboxes found in Spam over 7 days. It is measured directly in receiving inboxes, not through third-party seed lists.

Health score runs from 0 to 100:

StatusScore or conditionWhat to do
Healthy85–100Keep warming; prepare controlled outbound
Watch60–84Check DNS, spam rate and provider errors
At riskbelow 60Pause outbound plans and fix causes
Blockedlogin or permission failedReconnect the mailbox before judging placement

Ready for outbound requires all three conditions: 7+ days warming, 7-day spam rate of 10% or lower, and at least 30 warm-up emails received.

That gate is per mailbox. In a 150-mailbox fleet, some mailboxes will be ready before others. Do not let ready mailboxes cover for broken ones. A mailbox with failed login, missing DKIM or high spam placement should not send just because the fleet average looks fine.

Use a stricter operating rule for cold email. If a mailbox goes above 5% spam rate, pause it for a few days and investigate. Check authentication first, then sending pattern, copy, bounces and complaints.

Warm-up rescue only touches warm-up messages. If warm-up mail lands in Spam, BobWork moves it to Inbox, marks it read, labels it Warm-up, and archives it after 24 hours. Only mail carrying the engine’s hidden header is touched. Real mail is never read, moved or answered.

What should you do now?

Use this checklist before you press Start on 150 accounts.

StepActionHow to verify
1Split 150 mailboxes across domains, typically 2–5 mailboxes per domainYour domain list shows no single domain carrying the whole fleet
2Set SPF, DKIM and DMARC on every sending domainDomain checks show SPF, DKIM and DMARC passing
3Enable 2-Step Verification for Gmail and Google Workspace accountsApp password creation is available in the Google account
4Prepare the CSV with email, app_password, name and imap_host where neededThe file has one mailbox per row and no blank required fields
5Upload via Add mailbox → Many mailboxes: upload a CSVPassed rows connect; failed rows show a specific reason
6Re-upload after fixing failed rowsAlready-connected rows are skipped and failed rows shrink to zero
7Choose shared or private poolMailbox pool → Pool mode shows your intended setting
8Let each mailbox ramp from 3/day upwardDay 1 volume is about 450 total warm-up emails across 150 mailboxes
9Wait for the ready gate per mailboxEach sending mailbox has 7+ days warming, spam rate ≤10%, and 30+ received
10Start cold outreach conservativelyReal sending stays around 30–50/day per mailbox, with warm-up continuing

The biggest mistake at 150 accounts is treating setup as a one-time import. It is a daily operating system. Watch failed logins, DNS drift, provider warnings, spam placement and readiness per mailbox.

If you want to run the setup in BobWork, start with the free warm-up tool, upload the CSV, and choose the shared network or a private pool per account. Use Free for small tests, Pro for up to 10 mailboxes, and Agency for a 150-mailbox fleet on a new account.

What else do teams ask?

How much does it cost to warm up 150 email accounts? For a new BobWork account created from 10 November 2026, 150 mailboxes fit on Agency at $89/month. Older accounts keep their original per-mailbox plan; an older account with 3 free mailboxes would pay $294/month for 150 total mailboxes.

Can I upload 150 mailboxes at once? Yes. Use Add mailbox → Many mailboxes: upload a CSV. The CSV uses email, app_password, name and imap_host for non-preset domains. Each row gets the same IMAP and SMTP login test as a single mailbox.

How many warm-up emails will 150 mailboxes send? Each mailbox starts at 3 emails/day and adds 2 per day until it reaches 30/day. At 150 mailboxes, that is 450 warm-up emails on day 1, 2,250 on day 7 and 4,350 on day 14.

Should 150 mailboxes use a private pool? Usually yes if all 150 mailboxes are yours and you want control. BobWork uses a shared warm-up network by default, but you can switch to a private pool in Mailbox pool → Pool mode. Private pools need at least two mailboxes.

How many domains do I need for 150 mailboxes? A typical cold email setup spreads mailboxes across several domains, often 2–5 mailboxes per domain. That means 150 mailboxes may need dozens of sending domains. Every sending domain needs SPF, DKIM and DMARC.

When are warmed mailboxes ready for outreach? In BobWork, a mailbox is ready for outbound after 7+ days warming, a 7-day spam rate of 10% or lower, and at least 30 warm-up emails received. Keep real outreach conservative even after that gate.

Does BobWork support Outlook or Microsoft 365? Not yet. BobWork supports Gmail and Google Workspace, Zoho Mail, Lark Mail, Yahoo Mail, iCloud Mail, Amazon SES, SendGrid, Mailgun and any IMAP+SMTP mailbox. Outlook and Microsoft 365 are not supported yet because Microsoft requires OAuth.

Frequently asked questions

How much does it cost to warm up 150 email accounts?

For a new BobWork account created from 10 November 2026, 150 mailboxes fit on the Agency plan at $89/month. Older accounts keep their original per-mailbox plan; an older account with 3 free mailboxes would pay $294/month for 150 total mailboxes.

Can I upload 150 mailboxes at once?

Yes. Use Add mailbox → Many mailboxes: upload a CSV. The CSV uses email, app_password, name, and imap_host for non-preset domains. Each row gets the same IMAP and SMTP login test as a single mailbox.

How many warm-up emails will 150 mailboxes send?

Each mailbox starts at 3 emails/day and adds 2 per day until it reaches 30/day. At 150 mailboxes, that is up to 450 warm-up emails on day 1, 2,250 on day 7, and 4,350 on day 14.

Should 150 mailboxes use a private pool?

Usually yes if all 150 mailboxes are yours and you want control. BobWork uses a shared warm-up network by default, but you can switch to a private pool in Mailbox pool → Pool mode. Private pools need at least two mailboxes.

How many domains do I need for 150 mailboxes?

A typical cold email setup spreads mailboxes across several domains, often 2–5 mailboxes per domain. That means 150 mailboxes may need dozens of sending domains. Every domain needs SPF, DKIM and DMARC.

When are warmed mailboxes ready for outreach?

In BobWork, a mailbox is ready for outbound after 7+ days warming, a 7-day spam rate of 10% or lower, and at least 30 warm-up emails received. Keep real outreach conservative even after that gate.

Does BobWork support Outlook or Microsoft 365 for this?

Not yet. BobWork supports Gmail and Google Workspace, Zoho Mail, Lark Mail, Yahoo Mail, iCloud Mail, Amazon SES, SendGrid, Mailgun and any IMAP+SMTP mailbox. Outlook and Microsoft 365 are not supported yet because Microsoft requires OAuth.

Upload your whole fleet in one CSV

3 mailboxes free, then Pro ($19 a month, up to 10) or Agency ($89 a month, up to 300). Every row gets a real login test, and failed rows tell you why.

Start free